SR EN 267+A1:2012

Automatic forced draught burners for liquid fuels

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This European Standard applies to automatic forced draught oil burners supplied with: - a fuel having a viscosity at the burner inlet of 1,6 mm2/s (cSt) up to 6 mm2/s (cSt) at 20 °C; and - higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation. This European Standard is applicable to: - single burners fitted to a single combustion chamber; - single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account; - single-fuel and dual-fuel burners when operating on oil only; - the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the requirements of EN 676 will also apply in respect of the gaseous fuel function. This European Standa

Add to cart

General information

Status : Withdrawn
Approval date : 1/31/2012
Withdrawal date : 4/30/2020
Number of pages : 100
ICS : 27.060.10 Liquid and solid fuel burners
Technical Committee : 225 - Central heating boilers

Relations with other standards:

Replaces SR EN 267:2010
Normative reference SR ISO 9330-3:1999
Normative reference SR EN 1092-3:2004
Normative reference SR EN 1092-3:2004/AC:2008
Normative reference SR ISO 7-1:2000
Normative reference SR EN 1254-1:2001
Normative reference SR EN 1092-2:2003
Normative reference SR EN 953+A1:2009
Normative reference SR EN 1254-4:2001
Normative reference SR EN ISO 15614-7:2007
Normative reference SR EN 1057+A1:2010
Normative reference SR EN ISO 12100-1:2004
Normative reference SR EN ISO 15609-3:2004
Normative reference SR EN 50156-1:2004
Normative reference SR EN ISO 228-1:2003
Normative reference SR EN 1044:2002
Normative reference SR EN ISO 13857:2008
Normative reference SR ISO 8217:2008
Normative reference SR EN ISO 15609-2:2002/A1:2004
Normative reference SR EN ISO 11688-1:1999
Normative reference SR EN ISO 15614-11:2003
Normative reference SR EN 230:2005
Normative reference SR EN 60730-1:2004
Normative reference SR EN 10204:2005
Normative reference SR EN 10305-2:2010
Normative reference SR EN ISO 6806:2002
Normative reference SR EN 1088+A2:2008
Normative reference SR EN 60335-2-102:2007
Normative reference SR EN 676+A2:2008
Normative reference SR EN ISO 15609-1:2005
Normative reference SR EN ISO 1127:2002
Normative reference SR EN 60730-1:2004/A1:2004
Normative reference SR EN 1092-1:2008
Normative reference SR EN 1254-4:2001/AC:2001
Normative reference SR EN 10305-1:2010
Normative reference SR EN ISO 13849-1:2008
Normative reference SR EN 60730-1:2004/A12:2004
Normative reference SR EN ISO 15609-4:2009
Normative reference SR EN ISO 12100-2:2004
Normative reference SR EN ISO 15609-2:2002
Normative reference SR EN ISO 23553-1:2009
Normative reference SR EN 287-1:2011
Normative reference SR EN 10220:2003
Normative reference SR EN 15036-1:2007
Normative reference SR EN ISO 15609-5:2004
Normative reference SR EN ISO 15612:2004
Normative reference SR EN ISO 9606-4:2001
Normative reference SR EN 60730-1:2004/A11:2004
Normative reference SR ISO 9330-1:1994
Normative reference SR EN ISO 9606-5:2002
Normative reference SR EN 60730-1:2004/A14:2004
Normative reference SR EN 60529:1995
Normative reference SR ISO 9330-2:1999
Normative reference SR EN 61310-1:2008
Normative reference SR EN 60529:1995/A1:2003
Normative reference SR EN 1854:2010
Normative reference SR EN ISO 4871:2010
Normative reference SR EN ISO 9606-3:2001
Normative reference SR EN ISO 9606-2:2005
Replaced by SR EN 267:2020